{"id":14663,"date":"2026-09-18T07:18:50","date_gmt":"2026-09-18T07:18:50","guid":{"rendered":"https:\/\/anphuthanhvalve.com\/san-pham\/van-cong-ty-noi-hieu-btl-model-z41x-16\/"},"modified":"2026-10-14T03:09:55","modified_gmt":"2026-10-14T03:09:55","slug":"btl-brand-rising-stem-gate-valve-model-z41x-16","status":"publish","type":"product","link":"https:\/\/anphuthanhvalve.com\/en\/btl-brand-rising-stem-gate-valve-model-z41x-16\/","title":{"rendered":"BTL Brand Rising Stem Gate Valve | MODEL: Z41X-16"},"content":{"rendered":"

The BTL Z41X-16 Rising Stem Gate Valve is an industrial isolation valve featuring a rising stem design. During operation, the valve stem moves vertically upward or downward, allowing users to identify the valve’s open or closed status from a distance. This product complies with European design standards BS5163, EN558 & ISO 5752 Series-3 and is specifically designed for urban water supply and drainage networks, industrial park infrastructure, and fire protection pumping stations.<\/p>\n

Construction and Operating Principle of the BTL Z41X-16 Rising Stem Gate Valve<\/h2>\n

Material Specifications of the BTL Z41X-16 Rising Stem Gate Valve<\/h3>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
No.<\/th>\n Component<\/th>\n Material<\/th>\n Function<\/th>\n<\/tr>\n<\/thead>\n
1<\/td>\n Body<\/td>\n Ductile Iron<\/td>\n Main pressure-bearing body, housing the gate chamber and providing two ends for pipeline connection<\/td>\n<\/tr>\n
2<\/td>\n Gate<\/td>\n Ductile Iron + EPDM<\/td>\n Flow-blocking disc, fully coated with EPDM rubber to ensure tight sealing when closed<\/td>\n<\/tr>\n
3<\/td>\n Stem<\/td>\n Stainless Steel<\/td>\n Actuating stem that transmits rotational movement from the handwheel into the linear movement required to raise or lower the gate<\/td>\n<\/tr>\n
4<\/td>\n Bolt<\/td>\n Carbon Steel<\/td>\n Connects the flanges and secures the structure<\/td>\n<\/tr>\n
5<\/td>\n Gasket<\/td>\n EPDM<\/td>\n Provides sealing between the valve body joints<\/td>\n<\/tr>\n
6<\/td>\n Valve Bonnet<\/td>\n Ductile Iron<\/td>\n Seals the body chamber and provides guidance and support for the vertical movement of the valve stem<\/td>\n<\/tr>\n
7<\/td>\n O-Ring<\/td>\n EPDM<\/td>\n Seals around the valve stem and prevents leakage along the stem during operation<\/td>\n<\/tr>\n
10<\/td>\n Stem Nut<\/td>\n Carbon Steel<\/td>\n Drives the valve stem and converts the handwheel’s rotational movement into axial thrust<\/td>\n<\/tr>\n
11<\/td>\n Handwheel<\/td>\n Ductile Iron<\/td>\n Manual component used to open and close the valve, mounted on top of the valve stem<\/td>\n<\/tr>\n
12<\/td>\n Locking Ring<\/td>\n Carbon Steel<\/td>\n Secures the handwheel to the stem and prevents loosening during operation<\/td>\n<\/tr>\n
13<\/td>\n Nut<\/td>\n Carbon Steel<\/td>\n Positioning fastener for the transmission components<\/td>\n<\/tr>\n
14<\/td>\n Shaft<\/td>\n Carbon Steel<\/td>\n Additional connecting component in the valve’s top drive assembly<\/td>\n<\/tr>\n
15<\/td>\n Bolt<\/td>\n Carbon Steel<\/td>\n Connecting bolt for the bonnet\/handwheel assembly<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
BTL Rising Stem Gate Valve Dimensions<\/h3>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
DN<\/th>\n L (mm)<\/th>\n D (mm)<\/th>\n C (mm)<\/th>\n B (mm)<\/th>\n n-d<\/th>\n H1<\/th>\n H2<\/th>\n<\/tr>\n<\/thead>\n
50<\/td>\n 178<\/td>\n 150<\/td>\n 110<\/td>\n 18<\/td>\n 4-19<\/td>\n 315<\/td>\n 365<\/td>\n<\/tr>\n
65<\/td>\n 190<\/td>\n 165<\/td>\n 125<\/td>\n 19<\/td>\n 4-19<\/td>\n 335<\/td>\n 400<\/td>\n<\/tr>\n
80<\/td>\n 203<\/td>\n 185<\/td>\n 145<\/td>\n 19<\/td>\n 4-19<\/td>\n 390<\/td>\n 470<\/td>\n<\/tr>\n
100<\/td>\n 229<\/td>\n 200<\/td>\n 160<\/td>\n 19<\/td>\n 8-19<\/td>\n 425<\/td>\n 525<\/td>\n<\/tr>\n
125<\/td>\n 254<\/td>\n 220<\/td>\n 180<\/td>\n 19<\/td>\n 8-19<\/td>\n 535<\/td>\n 660<\/td>\n<\/tr>\n
150<\/td>\n 267<\/td>\n 250<\/td>\n 210<\/td>\n 19<\/td>\n 8-19<\/td>\n 575<\/td>\n 725<\/td>\n<\/tr>\n
200<\/td>\n 292<\/td>\n 285<\/td>\n 240<\/td>\n 20<\/td>\n 12-23<\/td>\n 730<\/td>\n 930<\/td>\n<\/tr>\n
250<\/td>\n 330<\/td>\n 340<\/td>\n 355<\/td>\n 22<\/td>\n 12-28<\/td>\n 950<\/td>\n 1200<\/td>\n<\/tr>\n
300<\/td>\n 356<\/td>\n 405<\/td>\n 410<\/td>\n 24.5<\/td>\n 12-28<\/td>\n 1010<\/td>\n 1310<\/td>\n<\/tr>\n
350<\/td>\n 381<\/td>\n 460<\/td>\n 525<\/td>\n 26.5<\/td>\n 16-28<\/td>\n 1305<\/td>\n 1655<\/td>\n<\/tr>\n
400<\/td>\n 406<\/td>\n 520<\/td>\n 585<\/td>\n 28<\/td>\n 16-31<\/td>\n 1385<\/td>\n 1785<\/td>\n<\/tr>\n
450<\/td>\n 432<\/td>\n 580<\/td>\n 650<\/td>\n 30<\/td>\n 20-31<\/td>\n 1455<\/td>\n 1905<\/td>\n<\/tr>\n
500<\/td>\n 457<\/td>\n 715<\/td>\n 770<\/td>\n 31.5<\/td>\n 20-34<\/td>\n 1695<\/td>\n 2195<\/td>\n<\/tr>\n
600<\/td>\n 508<\/td>\n 840<\/td>\n 355<\/td>\n 36<\/td>\n 20-37<\/td>\n 1875<\/td>\n 2475<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
Note: Product specifications for BTL products listed in the catalog are subject to change by the manufacturer without prior notice.<\/em><\/p>\n
Operating Principle of the BTL Rising Stem Gate Valve<\/h2>\n
Similar to other types of gate valves<\/a>, the BTL rising stem gate valve operates through the vertical movement of the valve stem to open or shut off the flow of the medium.<\/p>\n
\n
Opening the valve: When the handwheel is turned in the opening direction (typically counterclockwise), the stem nut fixed to the handwheel transmits torque to the threaded section of the valve stem. The valve stem moves vertically upward, lifting the gate away from the pipeline and fully opening the passage for the flow to pass through.<\/li>\n
Closing the valve: The process is reversed when closing the valve. When the handwheel is turned in the closing direction (clockwise), the valve stem moves downward. The gate is lowered to its lowest position, while the EPDM rubber coating around the gate is pressed tightly against the valve body, creating a seal across the entire cross-section and completely stopping the flow of the medium.<\/li>\n<\/ul>\n
Practical Applications of the BTL Z41X-16 Rising Stem Gate Valve<\/h2>\n
Due to its specific rising stem design, this type of valve must be installed in locations that meet two essential conditions: sufficient clearance above the valve and convenient visibility of its open\/closed status. Common installation locations include:<\/p>\n
\n
Water supply pumping stations and fire protection pump rooms: These are key installation locations where the valve is often installed immediately downstream of the pumping station, on the main water supply pipelines. This allows firefighters or technicians to quickly determine whether the fire protection water supply system is open or closed.<\/li>\n
Above-ground pipelines: Installed on pipelines running along technical corridors, factory walls, apartment buildings, or exposed supports. The exposed stem allows technicians to easily lubricate and perform periodic maintenance.<\/li>\n
Wastewater and chemical treatment plants: Since the valve stem is located outside the valve body and does not come into contact with the internal fluid, rising stem gate valves are preferred for installation in distribution valve assemblies at wastewater and chemical treatment plants, helping protect the stem threads from corrosion caused by the medium.<\/li>\n
Irrigation systems, canals, and discharge dams: Commonly installed at discharge outlets and raw water pumping stations due to their ability to withstand mechanical loads during operation.<\/li>\n<\/ul>\n
Installation note:<\/strong> Rising stem gate valves are not suitable for installation in locations with low ceilings, shallow valve chambers, deep submerged pits, or underground applications. Limited space may not provide sufficient clearance for the valve stem during operation. In addition, high humidity can accelerate corrosion of the exposed stem, while dirt and sand may accumulate in the stem threads, causing the valve to become stuck.<\/p>\n
Important Notes for Operation and Maintenance<\/h2>\n\n
Operation: Gate valves should only be used for fully opening or fully closing the flow. They are not recommended for long-term flow regulation in a partially closed position, as the high flow velocity through the narrow opening can cause localized erosion of the rubber-coated gate surface.<\/li>\n
Periodic maintenance: Check the sealing condition of the O-ring around the valve stem, as this is one of the areas most susceptible to leakage over time due to the repeated movement of the stem during opening and closing cycles. Regularly lubricate the threads between the stem components to prevent sticking and difficulty turning the handwheel.<\/li>\n
Check the stem travel clearance: For large sizes (DN300 and above, with H2 exceeding 1300 mm), ensure that there are no obstacles above the valve throughout its entire opening travel to prevent impacts that could bend or break the valve stem.<\/li>\n<\/ul>\n
An Phu Thanh<\/a> is an authorized distributor of BTL rising stem gate valves, with a wide range of sizes from DN50 to DN600 readily available in stock. For consultation or a preferential quotation for your project, please contact our Hotline\/Zalo at 0946 729 913<\/strong><\/a> for a prompt response. An Phu Thanh is always pleased to accompany you in your construction projects and water supply and drainage pipe.<\/p>\n","protected":false},"excerpt":{"rendered":"
The BTL Z41X-16 Rising Stem Gate Valve is an industrial isolation valve featuring a rising stem design. During operation, the valve stem moves vertically upward or downward, allowing users to identify the valve’s open or closed status from a distance. This product complies with European design standards BS5163, EN558 & ISO 5752 Series-3 and is specifically designed for urban water supply and drainage networks, industrial park infrastructure, and fire protection pumping stations. Construction and Operating Principle of the BTL Z41X-16 Rising Stem Gate Valve Material Specifications of the BTL Z41X-16 Rising Stem Gate Valve No. Component Material Function 1 Body Ductile Iron Main pressure-bearing body, housing the gate chamber and providing two ends for pipeline connection 2 Gate Ductile Iron + EPDM Flow-blocking disc, fully coated with EPDM rubber to ensure tight sealing when closed 3 Stem Stainless Steel Actuating stem that transmits rotational movement from the handwheel into the linear movement required to raise or lower the gate 4 Bolt Carbon Steel Connects the flanges and secures the structure 5 Gasket EPDM Provides sealing between the valve body joints 6 Valve Bonnet Ductile Iron Seals the body chamber and provides guidance and support for the vertical movement of the valve stem 7 O-Ring EPDM Seals around the valve stem and prevents leakage along the stem during operation 10 Stem Nut Carbon Steel Drives the valve stem and converts the handwheel’s rotational movement into axial thrust 11 Handwheel Ductile Iron Manual component used to open and close the valve, mounted on top of the valve stem 12 Locking Ring Carbon Steel Secures the handwheel to the stem and prevents loosening during operation 13 Nut Carbon Steel Positioning fastener for the transmission components 14 Shaft Carbon Steel Additional connecting component in the valve’s top drive assembly 15 Bolt Carbon Steel Connecting<\/p>\n","protected":false},"featured_media":14421,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false},"product_brand":[408],"product_cat":[325],"product_tag":[],"class_list":["post-14663","product","type-product","status-publish","has-post-thumbnail","product_brand-btl","product_cat-gate-valve","pa_ap-suat-pn10","pa_ap-suat-pn16","pa_chat-lieu-cast-iron","pa_model-z41x-16","first","instock","shipping-taxable","product-type-simple"],"acf":[],"_links":{"self":[{"href":"https:\/\/anphuthanhvalve.com\/en\/wp-json\/wp\/v2\/product\/14663","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/anphuthanhvalve.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/anphuthanhvalve.com\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/anphuthanhvalve.com\/en\/wp-json\/wp\/v2\/comments?post=14663"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/anphuthanhvalve.com\/en\/wp-json\/wp\/v2\/media\/14421"}],"wp:attachment":[{"href":"https:\/\/anphuthanhvalve.com\/en\/wp-json\/wp\/v2\/media?parent=14663"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/anphuthanhvalve.com\/en\/wp-json\/wp\/v2\/product_brand?post=14663"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/anphuthanhvalve.com\/en\/wp-json\/wp\/v2\/product_cat?post=14663"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/anphuthanhvalve.com\/en\/wp-json\/wp\/v2\/product_tag?post=14663"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}